When to Replace Lawn Mower Blade | Best Time To Change

If you’re like most people, you probably don’t think too much about your lawn mower blade. But the truth is, it’s one of the most important parts of your lawn mower. If your lawn mower blades are dull, it’s time to replace them. But how do you know when to replace lawn mower blade?

If you don’t take care of your lawn mower blade in the right time, it can quickly become dull and ineffective. So that your lawn-cleaning job will be in danger or even not done. And you may want to do it by yourself to save some bucks. Therefore, knwoing the best way to go about replacing lawn mower blade also another important task for you.

Luckily, there are some particular signs that helps you to know when to replace your lawn mower blade. let’s see that;

When to Replace Lawn Mower Blade

Here are a few signs to look for and determine you’re change the blade of your lawn mower;

  1. Your grass is starting to look uneven or patchy- This is a sure sign that your blade is getting dull and needs to be replaced.
  2. You’re having to make more than one pass over the same area to get the job done right- This means that your blade is no longer as sharp as it once was and needs to be replaced.
  3. You’re noticing grass clippings stuck to the underside of your mower deck- This can be a sign that your blade is chipped or damaged and needs to be replaced.
    If you notice any of these signs, it’s time to replace your lawn mower blade. It’s really that simple! Don’t wait until it’s too late – a dull or damaged blade will only damage your lawn further.

When to Replace your Lawn Mower Blade

How Do I Know If I Need a New Mower Blade?

If you’re unsure whether or not your lawn mower blade is still good, there are a few things you can check for. First, take a close look at the blade. If it’s bent, chipped, or otherwise damaged, it’s time for a new one. Second, see how well the blade cuts the grass. If it’s leaving behind ragged edges or straw-like clumps, it needs to be replaced.

Finally, feel how sharp the blade is. If it feels dull when you run your finger along it, it won’t cut well and should be replaced.

Also read Where is the Head Gasket on a Lawn Mower Located.

How Long Do Lawn Mower Blades Last?

It’s no secret that lawn mower blades take a beating. They are constantly exposed to dirt, grime, rocks, and branches—all of which can cause wear and tear. So, how long do lawn mower blades last? The answer depends on a number of factors, including the type of grass you have, how often you mow, and the quality of the blades.

But typically, you can expect most lawn mower blades to last between 12 and 18 months. If you have a higher-quality blade, it may last even longer. And if you take good care of your blades (i.e., sharpen them regularly), they will definitely last longer than if you neglect them.

Of course, there are always exceptions to the rule. Some people report that their blades only lasted a few months while others say theirs lasted several years. It really all comes down to how you use and maintain your lawn mower—and a bit of luck!

How Do You Know If Lawn Mower Blade is Dull?

It’s easy to tell if your lawn mower blade is dull. If you see brown patches in your grass, it’s a sign that the blades are no longer cutting properly and need to be sharpened. You can also check the blades by running your hand along them. If they feel blunt or jagged, it’s time for a new set.

When to Replace Mower Blade Vs Sharpen?

It’s also important to know when to replace or sharpen your mower blade. A dull blade not only tears grass, it also can damage your lawnmower engine. Here are some tips on how to tell when it’s time for a new blade or just a sharpening.

If you use your lawnmower regularly, you should replace the blades every season or two. If you don’t use it as often, you can get away with replacing them every few years. You’ll know it’s time for new blades when they start leaving brown patches in your otherwise green lawn.

And, how do you sharpen your mower blade? You can sharpen most types of mower blades with a file, rotary tool or bench grinder. Be sure to wear eye protection and follow the manufacturer’s instructions carefully. It’s usually best to remove the blade from the lawnmower before sharpening it.

When to Replace Lawn Mower Blade

Credit: www.youtube.com

How Much Does It Cost to Replace Lawn Mower Blades

The answer depends on the type of lawn mower you have and the type of blades you need. For a standard push mower, you can expect to pay anywhere from $10-$30 for a new set of blades. If you have a riding mower, the cost will be higher, around $50-$100. There are a few things to keep in mind when replacing your lawn mower blades.

That said, first make sure you get the right size blades for your model of mower. Then follow the manufacturer’s instructions for installing the new blades. However, don’t forget to sharpen or replace the blade on your other hand held power tools like your hedge trimmer or weed whacker.

How to Sharpen Lawn Mower Blades Without Removing

If you have a lawn mower, chances are you will need to sharpen the blades at some point. While it is best to remove the blade and sharpen it with a file or grinder, this is not always possible or necessary. You can actually sharpen lawn mower blades without removing them from the mower.

The first thing you need to do is make sure the area around the blade is clear of debris. This includes any grass clippings or dirt that might be clinging to the blade. Once the area is clear, you can proceed with sharpening the blade. There are a few different ways to sharpen lawn mower blades without removing them.

One way is to use a rotary tool with a grinding attachment. Another option is to use a handheld file. If you opt for using a rotary tool, be sure to wear eye protection since there will be flying sparks. To sharpen the blade using a rotary tool, start by holding the tool perpendicular to the blade.

Apply gentle pressure as you move the tool along the length of the blade in one smooth motion. Remember to keep moving, so you don’t overheat and damage the metal. Repeat this process on both sides of the blade until it is nice and sharp. If using a handheld file, hold it at an angle so that only half of its surface is in contact with the metal at any given time.

Use long strokes in one direction only toward yourself while applying moderate pressure evenly across entire surface being filed. Work slowly and carefully until desired results are achieved .

Do Lawn Mower Blades Need to Be Sharpened

It’s no secret that a well-maintained lawn requires regular mowing. But what about your lawn mower blades? Do they need to be sharpened regularly? The answer is yes. Just like any other cutting tool, the blades on your lawn mower will eventually become dull with use. And when that happens, it’s time to sharpen them.

But how often should you sharpen your blades? It depends on how often you use your mower and the type of grass you have. For most people, sharpening their blades once or twice a season is sufficient. However, if you notice your grass starting to look yellow or brown, it’s a good indication that your blades are in need of sharpening.

You can also tell by the way the grass is cut, if it’s tearing or shredding rather than slicing cleanly, it’s time for a tune-up. There are two ways to sharpen lawn mower blades- manually or with a machine. If you opt for the manual method, all you’ll need is a file and some elbow grease. This method takes more time but doesn’t require any special equipment.

On the other hand, if you decide to go the machine route, there are several types of machines available specifically for sharpening lawn mower blades. These range from simple hand-held devices to large benchtop models. Some even have attachments that allow you to sharpen other tools like axes and hedge trimmers.

Chipped Lawn Mower Blade

If you have a chipped lawn mower blade, it is important to fix it as soon as possible. A chipped blade can cause serious damage to your lawn, and it can also be dangerous. There are two ways to fix a chipped blade. The first way is to use a file or a grinder to remove the damaged part of the blade.

And, the second way is to replace the entire blade. If you choose to file or grind the blade, you need to be very careful not to damage the rest of the blade. It is also important to make sure that the filing or grinding is even across the entire surface of the blade.

If you decide to replace the entireblade, you will need to buy a new one from a hardware store or online retailer. Make sure that you get the right size and type of blade for your lawn mower. Once you have fixed or replaced your chipped lawn mower blade, be sure to take care of it so that it does not become damaged again in the future.

How to Sharpen Lawn Mower Blades With a File

Lawn mower blades need to be sharpened regularly to keep your lawn looking its best. The best way to sharpen lawn mower blades is with a file. You can use a hand file or an electric drill with a grinding attachment. To sharpen the blade, start by removing it from the lawn mower.

Disconnect the spark plug wire first so the blade doesn’t accidentally turn while you’re working on it. Then, use a wrench to loosen the bolt that holds the blade in place. Once the bolt is removed, you can take the blade off of the lawn mower. Now it’s time to start filing.

If you’re using a hand file, hold the blade at a 30-degree angle and work your way across the entire edge of the blade. Use long, even strokes and apply moderate pressure. If you’re using an electric drill, hold the grinder at about a 45-degree angle and move it slowly across the edge of the blade.

Use long, even strokes and apply moderate pressure. After you’ve gone over all of edges of the blade, put it back on your lawn mower and tighten down that bolt! Your blades are now nice and sharp and ready to give your lawn that perfect cut.

Best Lawn Mower Blades

Well, but what are the best lawn mower blades? There are a few things to consider when buying replacement blades for your lawn mower. The first is the size of the blade. You’ll need to make sure the blade is compatible with your particular model of lawn mower. The second is the material of the blade.

Lawn mower blades are typically made from either steel or titanium. Titanium is more expensive but also more durable, so it’s important to decide how often you’ll be using your lawn mower and how much wear and tear you’re expecting before making a decision. Finally, think about the shape of the blade.

Some blades are designed for specific types of grass, while others can be used on any type of grass. It’s important to choose a blade that will work well with the kind of grass you have in your yard. Let’s take a look at some of the best options on the market;

Oregon Gator Mulcher Blade– This option features sharp teeth that offer superior cutting power and longevity compared to standard blades. They’re also designed specifically for use on Bermuda and St Augustine grasses – two of the most popular types in North America. If you have either of these grasses in your yard, then this could be an excellent choice for you.

Maxpower 561713XB Commercial Grade Lawn Mower Blade– Another great option if you’re looking for something heavy-duty and long-lasting is this commercial grade blade from Maxpower. It’s made from tough carbon steel that can withstand regular use without dulling quickly – perfect if you have a large area to keep trimmed.

Lawn Mower Blade Angle

The blade angle is the angle between the cutting edge of the blade and the ground. It is typically expressed as degrees off of horizontal. For most lawn mowers, the ideal blade angle is between 15 and 30 degrees. But why does blade angle matter? A steeper blade angle (closer to vertical) will lift the grass up more and result in a cleaner cut.

However, it will also put more stress on the engine and require more power to operate. And a shallower blade angle (closer to horizontal) won’t lift the grass as much, but it will be easier on the engine and use less power. luckily, most lawn mower blade angles are adjustable.

So you can usually adjust the blade angle on your lawn mower by loosening a few screws or bolts and moving the blades to the desired position. Just be sure to double check your owner’s manual before making any adjustments, as some models may have different requirements.

How Often Should You Replace Your Lawn Mower

It’s that time of year again. The sun is shining, the flowers are blooming, and the grass is growing. That can only mean one thing- it’s time to break out the lawn mower and get to work. But how often should you replace your lawn mower? The answer may surprise you.

Most experts recommend replacing your lawn mower every 3-5 years, depending on how often you use it and how well you take care of it. Of course, if you’re using your mower heavily or if it’s starting to show signs of wear and tear, you may need to replace it sooner rather than later.

So what are some signs that it’s time for a new lawn mower? If your mower isn’t starting as easily as it used to or if it’s leaving behind patchy, uneven grass, then it might be time for an upgrade. Additionally, if your mower is making strange noises or vibrating excessively, these could also be signs that something is wrong and that a replacement is necessary.

No matter when you ultimately decide to replace your lawn mower, be sure to do some research beforehand so that you can choose the best model for your needs. With so many different options on the market today, there’s sure to be a perfect fit for everyone!


It’s important to know when to replace lawn mower blade. A dull blade will rip grass, causing brown patches, and it can damage the mower itself. A sharp blade, on the other hand, will result in a clean cut and a healthy lawn. Here I’ve covered all for you.

Leave a Comment